How to Store Monad (MON) Safely: Cold Storage Guide 2026

Author logo
Tangem team
•
Post image

 

Monad Mainnet launched less than a year ago. Its ecosystem is still forming; one major wallet has already dropped support, and the network runs on its own chain ID with addresses that look like Ethereum addresses but aren't the same. If you hold MON, those details matter before you move anything.

 

This guide covers how to store Monad safely: the difference between storage options, a step-by-step transfer to cold storage, backup, staking from a hardware wallet, and what to do if you were using Phantom.

Why self-custody matters for MON holders

When MON sits on an exchange, you don't hold the asset. You hold an IOU. The exchange controls the private keys, and with them, your funds. That's the core of custodial vs non-custodial wallet ownership: custodial storage offers convenience and account recovery, but it also exposes you to counterparty risk: exchange hacks, bankruptcy, regulatory freezes, or withdrawal halts.

 

Monad has fresh smart contracts, a smaller track record, and is facing active phishing campaigns targeting users who search for "add Monad to MetaMask" and land on fake network configuration pages. That environment attracts this kind of fraud.

 

The Phantom exit is the clearest example of app dependency risk. On August 26, 2026, Phantom ended support for Monad. MON didn't disappear. Balances remained on-chain, and Phantom stated there was no access deadline for recovering them through a compatible Monad wallet. Self-custody with offline keys addresses all three of these risks: counterparty exposure, phishing vectors, and app dependency.

How to Store Monad (MON) Safely: Cold Storage Guide 2026

MON basics for storage

MON is the native coin of Monad Mainnet and the gas token for every transaction on the network. The chain ID is 143. Monad uses Ethereum-compatible 0x addresses, so an address that works on Ethereum will also work on Monad, but the balances are completely separate. Sending MON to an Ethereum address on the Ethereum network would send it to the wrong chain.

 

Wrapped MON (WMON) is a separate token contract on Monad, not the native coin. If you're storing your main MON position, you're dealing with the native asset, not WMON.

 

The official block explorers for Monad Mainnet are MonadVision and Monadscan. Both let you verify that a transfer arrived at the right address on the right network. For more background on the network itself, see what is Monad.

Storage options at a glance

OptionKeys held byInternet exposureBest for
Exchange walletExchangeAlways onlineActive trading, short-term
Hot wallet (MetaMask, Rabby)YouAlways onlineFrequent DeFi use
Cold / hardware walletYouOfflineLong-term storage

The practical approach: keep a small working balance in a hot wallet for DeFi and gas, and move your main MON position to cold storage.

Choosing a hardware wallet

Tangem added Monad support in app version 5.34, released March 5, 2026. Here's what that means in practice: your private key is generated inside a Samsung S3D350A secure element with Common Criteria EAL6+ certification and never leaves the card. Transaction signing happens on-chip. You tap the card to authorize a transaction; the app prepares the unsigned transaction, the card signs it internally, and the app broadcasts the result. The key is never exposed to the phone or any internet-connected environment.

 

Tangem connects over NFC rather than USB or Bluetooth, so there's no cable and no battery to fail. The card has IP69K dust and water protection. WalletConnect on Monad is supported, which covers the dApp use cases described later in this guide. As a backup, Tangem uses 2 or 3 cards that share the same private key. Each card has full wallet access; they're interchangeable, not hierarchical. A BIP39 seed phrase is optional for users who want compatibility with other wallets; the default setup is seedless. The Tangem app is mobile-only. There's no desktop or web interface.

 

Get a Tangem hardware wallet

Sending MON to cold storage: what to check first

A few checks before you send anything.

  • Network selection: When withdrawing from an exchange, confirm the network is set to Monad (chain ID 143), not Ethereum or any other EVM chain. Sending MON over the wrong network will send it to the wrong place.

     

  • Address verification: Copy your receiving address from the Tangem app's Receive screen. Check the first four and last four characters after pasting. Don't type it manually.

     

  • Test transfer first: Send a small amount to confirm arrival before withdrawing the rest. Check it in the Tangem app, on MonadVision, or on Monadscan.

     

  • Keep some MON for fees: leave a small amount in your wallet after the main transfer. Every transaction on Monad costs gas in MON. A wallet with zero MON can't send anything.

     

  • Exchange withdrawal holds: Some exchanges impose a short hold on withdrawals after account changes or first-time address additions. Check your exchange's policy before you start.

For broader guidance on moving assets off an exchange, see why withdraw from exchanges.

Step-by-step transfer:

  1. Set up your Tangem card or Ring in the Tangem app and complete the backup before depositing any funds.
  2. Add the Monad network and MON to your token list in the app.
  3. Tap Receive on MON and copy your 0x address.
  4. On the exchange, choose Withdraw, select MON and the Monad network, and paste the address.
  5. Send a small test amount and verify it on the Tangem app or on a Monad explorer.
  6. Withdraw the rest, leaving a small amount of MON in the wallet for future transaction fees.

For general guidance on buying crypto before storing it, see "buy crypto with Tangem."

Backup: the part most beginners get wrong

Most people think about backup after something goes wrong. That's too late. With Tangem, the backup window closes at setup. New backup cards cannot be added after the hardware wallet setup is finalized, so the 2- or 3-card set must be completed before you deposit anything. All cards share the same private key and are interchangeable rather than hierarchical. Lose all of them without a seed phrase, and the funds will be permanently inaccessible. Tangem cannot recover them.

 

Store backup cards in physically separate locations. Tangem's own guidance suggests keeping the primary card with you and the backup cards in separate secure locations, a home safe and a safety deposit box, for example.

 

If you chose the optional seed phrase during setup, store it offline. Write it down on paper, keep it away from the card, and never photograph it or type it into any website. Anyone with that phrase controls the wallet.

 

For hot wallets, the recovery phrase is the wallet. The same rules apply: offline only, separate from the device, never shared. See how backup works for the full technical detail.

Staking MON from cold storage

Monad uses in-protocol delegation. You delegate MON to an existing validator rather than running one yourself. MON isn’t currently available for native staking in the Tangem app. Tangem's supported native staking assets include ATOM, BNB, POL, SOL, ETH, ADA, TRX, and GRAM. 

 

Tangem supports WalletConnect on Monad, so you may be able to connect to a compatible Monad dApp after adding the network to your wallet. Tangem does not provide a Monad-specific dApp staking guide. Before confirming any transaction, check the dApp’s permissions, staking terms, and withdrawal conditions; using a dApp also involves smart-contract risk. No APR figures are quoted here. Staking yields change with network conditions.

Using Monad dApps without exposing your savings

The cleanest approach is to keep two separate balances: a small working amount in a hot wallet for DeFi activity, and the bulk of your MON in cold storage. That way, a compromised dApp approval can only reach the hot wallet balance.

 

When you do connect Tangem to a Monad dApp via WalletConnect, read every approval request before tapping the card. Starting with app version 5.27, Tangem's WalletConnect integration includes Blockaid-powered transaction simulation, an off-chain preview that shows balance changes and flags hidden operations before you sign. It also includes Know Your dApps (KYDA) verification, which checks the dApp before connection and warns about suspicious sites.

 

Reject any approval you don't recognize. Periodically revoke token approvals you no longer use. Old approvals are a persistent attack surface even after you stop using a dApp.

Moving MON out of Phantom after August 26, 2026

Phantom ended Monad support on August 26, 2026. MON and other Monad assets can no longer be viewed, sent, or swapped in Phantom, but all balances remain on the Monad blockchain. The funds are controlled by the recovery phrase or private key tied to the wallet, not by Phantom's app.

 

Here's the recovery path:

  1. Securely record your Phantom Secret Recovery Phrase offline. Write it on paper. Do not type it into any website or app other than the one you're importing into.
  2. Import that recovery phrase into a wallet that officially supports the Monad mainnet.
  3. Verify the imported wallet shows the same Monad address and the correct balance.
  4. Send your MON from that imported wallet to a freshly created hardware wallet address.
  5. Stop using the old recovery phrase once the funds have moved.

If you held MON across multiple Phantom accounts, each account may have a separate private key. Import each one separately.

 

One firm rule: Phantom will never contact you first or ask for your recovery phrase or private key. Any unsolicited "migration assistance" offering to help you move funds is a scam.

Conclusion

The short version of how to store Monad safely: move your main MON position to a hardware wallet with offline keys, complete your backup before you deposit, select the Monad network when withdrawing, send a small test transfer first, and keep a separate small balance for gas and DeFi.

 

If you're coming from Phantom, your funds are still on-chain. Record your recovery phrase offline, import it into a Monad-compatible wallet, verify the balance, and migrate to a fresh hardware wallet address. For a closer look at storage choices, see how to choose a cold wallet.

 

Secure your MON with a Tangem hardware wallet

 


This article is for information only and is not financial advice. Crypto assets are volatile, and wallet features, supported networks and fees change. Check each provider's current terms before you move funds.

FAQ About Storing MON

  • Cold storage with a hardware wallet is the safest long-term option. The private key remains on an offline device and never leaves an offline environment. Complete your backup before depositing funds, store backup cards in separate physical locations, and keep only a small working amount in a hot wallet for day-to-day transactions.

  • An exchange wallet is convenient for trading, but it is custodial. The platform holds the keys and can face withdrawal halts or other disruptions. For long-term storage, move MON to a self-custody wallet after you finish the withdrawal checks.

  • Choose MON on the Monad network (chain ID 143). Do not select Ethereum or another EVM network just because the address begins with 0x. Verify the network and address before confirming the withdrawal.

  • Not through Tangem's native in-app staking as of October 2026; MON is not on its current list. Tangem supports WalletConnect on Monad, so you may be able to connect to a compatible Monad dApp after adding the network to your wallet. Tangem does not provide a Monad-specific dApp staking guide. Before confirming any transaction, check the dApp’s permissions, staking terms, and withdrawal conditions; using a dApp also involves smart-contract risk.

  • Phantom ended Monad support on August 26, 2026. Your MON is still on-chain and accessible through your Secret Recovery Phrase. Record the phrase offline, import it into a wallet that supports the Monad mainnet, verify your balance, then send MON to a new hardware wallet address, and stop using the old phrase.

  • Yes. Every transaction on Monad costs gas paid in MON. If your wallet balance reaches zero, you won't be able to send anything. Keep a small reserve of MON in any wallet you use for transactions, including the hardware wallet you're moving funds into.

  • A single lost card does not block access if you have completed a 2- or 3-card backup, since each card can access the wallet. Use another card, then keep remaining cards in separate locations. If all cards are lost and no seed phrase exists, Tangem cannot recover the funds.

Author logo
Author Tangem team

We are a team of Tangem Wallet users dedicated to simplifying self-custody for everyone.

Author logo
Reviewed by Patrick Dike-Ndulue

Senior editor covering crypto, onchain equities, and technology.