App Functionality

• What do I do if I can’t scan the card or ring on Android?

  To scan your Tangem Wallet on an Android device, please follow these step-by-step instructions:

  
  Step 1. Check NFC support on your device
  Make sure your mobile device supports NFC. Not all smartphones have an NFC module, although most modern devices support this function.

  
  Step 2. Find the NFC module
  The NFC antenna may be located in different places on your smartphone, depending on its brand and model. 

  
  The location of the NFC module on Android devices depends not only on the brand but also on the device model. You will find more detailed information on the manufacturers' websites: Samsung, Huawei, Sony Xperia, Google Pixel, Motorola, LG, HTC, Nokia.

  
  Step 3. Position the Tangem Wallet
  Bring the Tangem card or ring as close as possible to your mobile device's NFC module. Ensure no obstacles between the card or ring and the phone's NFC module that could interfere with scanning.
  
  

  If you are scanning the ring, it must be removed from your finger and placed against the phone. Please note that the Tangem app must be open for the ring to be scanned.

  
  Step 4. Hold to Scan
  Do not remove the Tangem card or ring from your mobile device until the scan is complete—you might hear a beep or see a visual indicator on your device.
  
  Step 5. Remove the card or ring from the phone after the scan is complete
  We recommend keeping the Tangem device near your phone only when the Tangem app requests it and the scanning window is open. Do not hold the card or ring close to the phone while entering the access code. Additionally, we do not recommend storing the card in a phone case.

  
  Recommendations
  • Make sure NFC is enabled on your device, including the Tangem app.
  • Please note that using a smartphone case may make scanning difficult. We recommend removing your phone case before scanning your Tangem Wallet.
  • The location of the NFC module on Android mobile devices may vary depending on the device model. Therefore, you need to determine its exact location on your phone. This can be done through the “Help” button, which is located in the scanning window.
  • It is important to keep devices still while scanning to avoid losing connection.
  • Remove the card or ring while entering the access code and place it back on the phone when the scanning window opens.
  • To use NFC, your phone's display must not be locked, and you may need to enable NFC in your smartphone's settings.
  • In some cases, we also recommend restarting your mobile device.

  
  Please refer to this video for a detailed explanation of the card scanning process: https://youtu.be/n6TX3SCnAYo?si=VM9IbvEEyZhUFn38.
  
  Please refer to this video for a detailed explanation of the ring scanning process: https://www.youtube.com/watch?v=felVL1eL-NE.
  
  Our blog article "How to Scan Tangem Wallet Cards" provides a step-by-step guide.

  
  If you have completed all the steps and the unresolved problem, please let us know by submitting a request through the app in the "Are you having difficulty scanning your card?" window. Just tap Cancel twice while scanning.

• What do I do if I can’t scan the card or ring on iOS?

  To scan a Tangem card or ring, place it against the top of your iPhone until it scans. When you click on Scan, an animation will show you how to properly place the card or ring on the phone.

  
  To ensure successful scanning, consider the following recommendations:

  
  1. Using a smartphone case may make scanning difficult.
  We recommend removing the case from your phone and scanning the card or ring again. Cases, especially thick or metal ones, can block the NFC signal needed for scanning.

  
  2. Remove the card or ring while entering the access code.
  To avoid accidental errors, remove the card or ring from the phone when entering the access code. After entering the code, touch the card or ring back to the phone when the scanning window is already open.

  
  3. Reboot the mobile device.
  Restarting the phone may help. This will reset all active processes and resolve temporary NFC glitches.

  
  4. Ensure that there are no other NFC devices near your phone’s NFC module.
  Other NFC devices, such as bank cards in your phone case, may interfere with scanning. Remove all foreign objects from the NFC coverage area to ensure correct scanning.
  
  5. Scanning the ring. 
  To scan the ring, remove it from your finger and place it near the top part of the phone’s back panel, close to the camera. Please note that the Tangem app must be open for the ring to be scanned.

  
  Please refer to this video for a detailed explanation of the card scanning process: https://youtu.be/n6TX3SCnAYo?si=VM9IbvEEyZhUFn38. 
  
  Please refer to this video for a detailed explanation of the ring scanning process: https://www.youtube.com/watch?v=felVL1eL-NE. 

  
  Our blog article "How to Scan Tangem Wallet Cards" provides a step-by-step guide.
  
  If you have completed all the steps and the unresolved problem, please let us know by submitting a request through the app in the "Are you having difficulty scanning your card?" window. Just tap "Cancel" twice while scanning.

• How do I create Tangem Wallet 2.0 without a seed phrase?

  To get started with Tangem Wallet, you will need an NFC-enabled mobile device and the official Tangem app. You can download the Tangem app from the App Store, Google Play, and GitHub. You can also place the card close to your phone's NFC module and be prompted to download the app from the store.
  
  

  To set up your Tangem Wallet without a seed phrase, follow these steps:
  1. Open the Tangem app.
  2. Tap "Scan" and then scan the card by tapping it on your phone.
  3. Select "Create wallet" and scan the card again. At this point, all the keys are generated inside the card, and the wallet is created.
  
  

  The wallet will then prompt you to create a backup. You can back up your keys to two other blank Tangem Wallet cards. All the cards can be used to access our wallet. But if you only add one backup card now, you won't be able to add more later.
  
  To start the backup process, follow these steps: 
  1. Tap "Add a backup card".
  2. Scan a backup card by tapping it on your phone.
  If you try to add a card that has been used to create a wallet, the app will ask you to reset the card and proceed with the backup process. You can only use blank Tangem Wallet cards to create a backup.
  Do not reset the card if the attached card contains funds, as this will result in losing those funds. 
  3. You can link a third card if you have it or complete the process. To link the third card, tap "Add a backup card" and scan the card.
  4. Tap the "Finalize the backup".
  
  

  You will then be asked to create a single access code to protect all the cards.
  1. Tap "Continue" and enter an access code. Use any word, phrase, or number as your access code. You can set a unique access code for each card later.
  2. Select "Continue", re-enter your access code to avoid a mistake and tap the "Submit" button.
  3. Scan all the cards again to finish the process.

• How do I create Tangem Wallet 2.0 with a seed phrase?

  To get started with Tangem Wallet, you'll need an NFC-enabled mobile device and the official Tangem app. You can download the Tangem app from the App Store and Google Play. You can also tap the card on your phone's NFC module, and be prompted to download the app from the store.
  
  

  A seed phrase is a series of words that allows you to recover your wallet. Unlike the keys the card generates, seed phrases are unprotected and can be copied and stolen. Use this option at your own risk.
  
  

  To set up your Tangem Wallet with a seed phrase, follow these steps:
  1. Open the Tangem app.
  2. Tap "Scan" and scan the card by tapping it on your phone.
  3. Select "Other options".
  4. Select "Generate seed phrase". Your seed phrase will appear on your screen. Write these 12 words down in order and keep them in a safe and secret place.
  5. Tap "Continue". To check whether you've written down your seed phrase correctly, enter the words on the screen in the correct order.
  6. Tap "Create wallet" and scan the card. 
  
  

  The wallet will then prompt you to create a backup. You can back up your keys to two other blank Tangem Wallet cards. All the cards can be used to access our wallet. But if you only add one backup card now, you won't be able to add more later.
  
  To start the backup process, follow these steps: 
  1. Tap "Add a backup card".
  2. Scan a backup card by tapping it on your phone.
  If you try to add a card that has been used to create a wallet, the app will ask you to reset the card and proceed with the backup process. You can only use blank Tangem Wallet cards to create a backup.
  Do not reset the card if the attached card contains funds, as this will result in losing those funds. 
  3. You can link a third card if you have it or complete the process. To link the third card, tap "Add a backup card" and scan the card.
  4. Tap the "Finalize the backup".
  
  

  You will then be asked to create a single access code to protect all the cards.
  1. Tap "Continue" and enter an access code. Use any word, phrase, or number as your access code. You can set a unique access code for each card later.
  2. Select "Continue", re-enter your access code to avoid a mistake and tap the "Submit" button.
  3. Scan all the cards again to finish the process.

• How do I import a wallet to Tangem Wallet 2.0?

  You can import your wallet to Tangem Wallet using a seed phrase of 12, 15, 18, 21 or 24 words. To do this, follow these instructions:
  1. Open the Tangem app.
  2. Tap "Scan" and scan the card by tapping it on your phone.
  3. Select "Other options" and then "Import wallet".
  4. Enter your seed phrase, tap "Import" and scan the card.
  
  

  The wallet will then prompt you to create a backup. You can back up your keys to two other blank Tangem Wallet cards. All the cards can be used to access our wallet. But if you only add one backup card now, you won't be able to add more later.
  
  To start the backup process, follow these steps: 
  1. Tap "Add a backup card".
  2. Scan a backup card by tapping it on your phone.
  If you try to add a card that has been used to create a wallet, the app will ask you to reset the card and proceed with the backup process. You can only use blank Tangem Wallet cards to create a backup.
  Do not reset the card if the attached card contains funds, as this will result in losing those funds. 
  3. You can link a third card if you have it or complete the process. To link the third card, tap "Add a backup card" and scan the card.
  4. Tap the "Finalize the backup".
  
  

  You will then be asked to create a single access code to protect all the cards.
  1. Tap "Continue" and enter an access code. Use any word, phrase, or number as your access code. You can set a unique access code for each card later.
  2. Select "Continue", re-enter your access code to avoid a mistake and tap the "Submit" button.
  3. Scan all the cards again to finish the process.

• How do I create Tangem Wallet 1.0?

  To get started with Tangem Wallet, you'll need a mobile device that supports NFC and the official Tangem app. The Tangem app is available for download from the App Store and Google Play. You can also tap the card on your phone's NFC module, and be prompted to download the app from the store.
  
  

  To set up your Tangem Wallet with a backup, follow these instructions:

  1. Open the Tangem app.

  2. Tap the "Scan" button and scan the card by placing it close to the device.

  3. Choose the "Create wallet" option and scan the card again.

  At this point, all the keys are generated and the wallet is created.
  
  

  The wallet will then prompt you to create a backup. You can back up your keys to two other blank Tangem Wallet cards. Please note that you can either create a backup now or later. If you add one backup card now, however, you won’t be able to add more backup cards later.
  
  To start the backup process:

  — Select the "Back up now" option.

  — Tap the "Add a backup card" button.

  — Scan a backup card, placing the card close to the device.

  — Repeat the last 2 points as many times as there are cards in your bundle. You can link up to 3 cards to one wallet.

  — Tap the "Finalize the backup process" button.
  
  

  You will then be asked to create a single access code to protect all the cards.

  1. Tap the "Continue" button and enter an access code. Choose any word, phrase or number you want as your access code. You can set a unique access code for each card later.

  2. After that, select the "Continue" option, enter your access code again, and tap the "Submit" button.

  3. Scan all the cards one by one again.
  
  

  Here is a video explaining how to set up your Tangem Wallet, while step-by-step instructions with screenshots can be found on our blog.

• What do I do if I can't create a backup and see the "This card already has a wallet" error message?

  If you receive the message "A wallet has already been created on this card", it may mean that you accidentally scanned both cards, creating a separate wallet on the second card. To fix this issue, you'll need to reset the card to its factory settings. Follow these steps:
  
  

  1. Close the app (don't just minimize it) to stop the backup process.
  2. Reopen the app and scan the card with the error.
  3. If cryptocurrency is stored on this card, temporarily move it to another location, such as another wallet or an exchange.
  4. Click on the three dots in the upper right corner.
  5. Choose the desired wallet from the list.
  6. Tap on "Card settings", then "Reset to Factory Settings".
  7. Scan the card again.
  
  

  Once this is done, you can create a backup using these instructions:
  1. Scan the card on which the wallet has already been created.
  2. Select "Backup".
  3. Click on "Add a backup card".
  4. Scan the backup card by placing it near the device.
  5. If you have another card, you can add it or complete the process. To link a third card, tap "Add a backup card" and scan the card.
  6. Click "Finalize the backup".
  7. Select "Continue" and create an access code.
  8. Scan all the cards one by one again.
  
  

  Important! If you have funds on the card, move them to another location before resetting the card to factory settings, as resetting the card will result in a complete erasure of all funds currently stored on it.

• What languages does the Tangem app support?

  The Tangem app is fully available in English, French, German, Japanese, Russian, Spanish, and Ukranian and partially in Italian and Traditional Chinese.

• Can I use multiple wallets on one device?

  You can use an unlimited number of wallets on one mobile device. The phone itself doesn't store any assets you hold; it simply acts as a display by visualizing specific data for a particular user on screen. The storage of private keys and signing of transactions is done by your card.

• How do I change an access code?

  Method 1: If you forgot your access code
  If you forget the access code for one or all of your cards, you can reset it and set a new access code. To do this, you will need two cards: the card whose access code you want to change and a backup card to confirm the reset.
  
  

  1. If you are not using biometric authentication, open the Tangem app, scan the card you want to reset the access code for, and proceed to step 5 of these instructions. If using biometric authentication, open the Tangem app and tap the three dots in the upper right corner of the homepage.
  2. Select the desired wallet from the list.
  3. Go to Card Settings.
  4. Scan the card on which you want to reset the access code.
  5. On the access code entry screen, tap “Forgot your code?”.
  6. On the next screen, enter the new access code twice.
  The access code can consist of any word, phrase, or number that you want to use as the access code. The minimum number of characters is 4; the maximum number is unlimited.
  7. Click Continue and attach the card you want to reset the access code. Wait for the 15-second countdown to end.
  8. Press Continue and attach the backup card (the second or third card in the set). Wait for the 15-second countdown to end.
  9. Scan the card you want to change the access code on.
  
  Your forgotten access code has been successfully reset, and you can now use the new access code.
  
  Detailed instructions are also available in our blog article: How to reset the access code on Tangem Wallet.

   

  Method 2: If you remember your card access code:
  1. Open your wallet in the Tangem app, and on the homepage, tap on the three dots in the top right corner.
  2. Select the desired wallet from the list.
  3. Next, go to the Card Settings section.
  4. Scan the card on which you want to reset the passcode.
  5. Enter the current access code and click Continue.
  6. Scan the card for which you want to change the access code again.
  7. Select Change Access Code and use biometric authentication or enter the access code. 8. Enter the new access code twice and click Continue.
  The access code can consist of any word, phrase, or number you want to use as an access code. The minimum number of characters is 4; the maximum number is unlimited.
  9. Scan the card on which you are changing the access code.
  10. If you do not use biometric authentication, enter the current access code at the next step (note: don’t enter a new code). Then click “Continue” and scan the card again.
  
  Detailed instructions are also available in our blog article: How to change the access code on Tangem Wallet.
  
  Important! The access code is stored on each card separately. When you change the access code, it changes only on the selected card. If you want to change/reset the access code on other cards, you must repeat the procedure with each card.

• How do I exchange one cryptocurrency for another in my wallet?

  Third-party platforms such as ChangeNOW, Changelly, ChangeHero, SimpleSwap, 1inch, and OKX facilitate the exchange of cryptocurrencies in the Tangem app.
  
  

  Here are the steps to swap cryptocurrencies:
  1. Open the Tangem app and log into your wallet.
  2. Select the currency you want to exchange.
  3. Tap "Swap" on the Token page.
  4. Specify the amount and select the currency you want to receive. Tangem Express will show you the provider offering the best rates. You can tap on a listed provider to see all available providers and their rates.
  5. Tap "Swap" and enter your access code or biometric ID.
  6. Scan your Tangem card to confirm the transaction.
  
  

  You can also connect Tangem Wallet to various decentralized exchanges (DEX) such as Uniswap, PancakeSwap, and others through WalletConnect.
  For detailed instructions on using WalletConnect on Tangem Wallet, visit our blog: How to use WalletConnect on Tangem Wallet.

• Why do I need to give permission to a smart contract before exchanging cryptocurrency through 1inch/OKX?

  The exchange process includes two stages:
  1. Granting permission to a smart contract (occurs with the deduction of a small network commission).
  2. Swapping one cryptocurrency for another (occurs with the deduction of a higher network commission).
  
  Granting permission is a standard procedure for all decentralized exchanges such as Uniswap, PancakeSwap, CowSwap, 1inch, etc. It protects your wallet from unauthorized access by a smart contract without your consent.
  Smart contracts cannot access your tokens unless you give them access. By granting such permission, you give the smart contract the liberty to spend your assets. The miners, in turn, receive a commission for recording this action on the blockchain which is paid by you (gas fee).
  
  

  Here are the step-by-step instructions on what granting permission looks like in the Tangem application:

  1. Open the Tangem app and log in to your wallet.
  2. Select the cryptocurrency you want to exchange.
  3. On the cryptocurrency’s page, tap Swap.
  4. Enter the amount of tokens you want to exchange and select the currency you want to exchange them for.
  5. Tap Give permission. A window will open, showing the fee for issuing a permit. You can also choose to issue a permit for the current transaction or unlimited. Then tap Approve and scan your wallet.
  At this point, you have given permission but not completed the swap.
  6. To exchange your crypto, Tap Swap, then scan your wallet to sign the transaction. Once the transaction is signed and sent to the blockchain, its data can be viewed in the browser.

   

  Benefits of granting unlimited permission
  If you have granted unlimited permission to a smart contract, you will not need to do this again for future transactions (only if you don’t revoke the permission).
  
  Important points
  • Permission is required for each individual smart contract.
  • Swap permission will only be requested if you exchange a token that operates under smart contracts (for example, an ERC20 token). For native coins, such permission is not needed since they’re regulated by blockchain algorithms, not smart contracts.

• How do I add a token to the homepage?

  With these two methods, you can add a token to your wallet’s homepage:
  
  

  Method 1: Through the "Manage tokens" section
  1. Open the app and log in to your wallet.
  2. Tap the three dots in the top right corner.
  3. Select the desired wallet.
  4. Go to the "Manage Tokens" section.
  5. Use the search bar to find the cryptocurrency by name or ticker.
  6. To the right of the cryptocurrency name, an arrow opens a list of available networks for this token.
  7. Enable the switch for the network you need and tap "Save". You may need to scan your wallet here.
  
  

  Method 2: Through the "Market" section
  1. Open the app and log in to your wallet.
  2. Tap the Search through the market bar at the bottom or pull it upwards.
  3. Find the cryptocurrency by name, ticker, or contract address and tap on it.
  4. In the "My Portfolio" section, tap "Add to Portfolio". Note that Markets section allows you to search for any cryptocurrency listed on CoinGecko. If the message "This asset is not available" appears instead of the "Add to Portfolio" button, it means Tangem does not currently support this cryptocurrency, and you cannot add it to your portfolio.
  5. If you have multiple wallets, select the one where you want to add the token.
  6. Enable the switch for the network you need and tap "Continue". You may need to scan your wallet here.

• Balance not displayed, “Blockchain unavailable” error. What should I do?

  Sometimes, the response from the blockchain API takes much longer, and you need to wait. A weak internet connection may affect the loading of wallet balances.

  
  We recommend the following:
  1. Check the app version: Make sure you have the latest version of the app. You can check it here: open the wallet in the Tangem application, click on the three dots in the upper right corner, at the bottom of the page the application version is “Tangem xxx”. The Tangem application is available for update and download on the App Store, Google Play, and GitHub.
  2. Refresh the token page: Log in to the app and select a token whose network is unavailable. This will open the token wallet. To update data, swipe (pull) the screen from top to bottom. Wait approximately 30 seconds for your balance information to update.
  3. Hide and re-add a token: If only one token is not available, try hiding it and then adding it again to the home screen.
  To hide a token from the home screen, open your wallet in the Tangem app, select the token, click on the three dots in the top-right corner, and select Hide Token.
  4. Change your Internet connection: if you are using Wi-Fi, disconnect from it or use another one.
  5. Use a VPN: If you already use it, try turning it off.
  6. Reinstall the Tangem app: The Tangem app is available for download on the App Store, Google Play, and GitHub.

  
  If these steps do not help, please submit a support request and technical data:
  1. Open the Tangem app and log in to your wallet.
  2. Click on the three dots in the upper-right corner of the homepage.
  3. Select “Contact support”. 
  
  An email will be generated automatically; you don’t need to add or remove anything; just send it.

• How can I view the cryptocurrency price chart?

  The Tangem app allows you to track and analyze a wide range of data across multiple cryptocurrencies.
  
  To access this data, follow these steps:
  1. Open the app and log into your wallet.
  2. At the bottom of the screen, tap the "Search through the market" bar or pull it upwards.
  3. Find the cryptocurrency you need by name, ticker, or contract address.
  4. Select the cryptocurrency from the list.
  
  After selecting a cryptocurrency, you’ll have access to the following information:
  
  1. Current price and 24-hour change: Cryptocurrency prices update every minute, showing the current price and its change over the past 24 hours. Prices for tokens with a market capitalization of less than 100,000 USD are updated every 15 minutes.
  
  2. Price chart: You can analyze the cryptocurrency's price changes over various periods: 24 hours, 7 days, 1 month, 3 months, 6 months, 1 year, or the entire history of the cryptocurrency.
  
  3. General information: A brief overview of the cryptocurrency, including key project details.
  
  4. Insights: This section includes the following metrics for the selected period (24 hours, 7 days, 1 month): - Experienced buyers: Buyers with at least 100 outgoing transactions.
  - Holders: Changes in the number of token holders during the selected period.
  - Liquidity: Changes in the available liquidity for the token.
  - Buy Pressure: The difference between the volume of buyers and sellers.
  Moralis, a Web3 development platform, provides the data in this section, updated every two hours. Insights are available only for cryptocurrencies on EVM-compatible networks.
  
  5. Security score: A metric that assesses the security level of a blockchain or token based on various factors and is compiled from the following sources: Moralis, Certik, Cyberscope.
  
  6. Metrics: This section allows you to evaluate key indicators for the cryptocurrency market.
  - Market capitalization: The total market value of the cryptocurrency, calculated by multiplying the current coin price by the total circulating supply.
  - Market rating: The cryptocurrency's rank among all coins by market capitalization.
  - 24-hour trading volume: The total amount of cryptocurrency sold in the last 24 hours, indicating market activity and liquidity.
  - Fully diluted valuation: The theoretical total value of the cryptocurrency if all possible coins were in circulation, including those not yet issued.
  - Circulating supply: The total number of coins available for trading and in circulation.
  - Total supply: The maximum number of coins or tokens that can ever exist for the selected cryptocurrency. Data for these indicators is sourced from CoinGecko and is updated every minute.
  
  7. Price performance: This section helps assess price fluctuations and compare the current value with its peaks and lows over the selected period (24 hours, 1 month, or the cryptocurrency’s entire history). After selecting the time frame, the minimum price is displayed on the left and the maximum on the right. A blue line shows the current price, while a gray line represents the highest price over the selected period.
  
  8. Links: This section includes links to the project’s official website, documents, social media, repository, and other related resources.
  
  In the "Market" section, you can also:
  - Add a cryptocurrency to your portfolio.
  - Stake tokens. Learn more about staking in the Tangem app in our blog article.
  - Copy your wallet address. Tap your wallet name in the "My Portfolio" section, then select "Receive."
  - Send, buy, sell, or exchange cryptocurrencies. If you have multiple wallets, tap your wallet name in the "My Portfolio" section to access these operations.
  
  In the "Market" section, you can sort tokens by various criteria:
  - Rating: Cryptocurrencies are sorted by market capitalization.
  - Trending: Cryptocurrencies that are currently gaining popularity.
  - Experienced Buyers: Cryptocurrencies invested in by experienced buyers.
  - Top Gainers and Top Losers: Cryptocurrencies with the highest growth or decline over the selected period: 24 hours, 7 days, or 1 month.
  
  Regardless of the sorting method, the cryptocurrency's rank, current price, and market capitalization are displayed under its name. Changing the period (24 hours, 7 days, or 1 month) affects the price growth/decline percentage and the chart. The list includes all cryptocurrencies from CoinGecko, with a market capitalization of more than $100,000. To see tokens with a lower market cap, select "Show Tokens" at the end of the search list.
  
  CoinGecko provides the cryptocurrency list and all related data, except for the Insights block, where the information comes from Moralis. Detailed information on how CoinGecko calculates and evaluates various metrics can be found here.

• Is staking available in Tangem Wallet?

  Native staking is available directly in the Tangem app and is powered by StakeKit. Detailed instructions can be found in our blog: How to stake crypto.
  
  Liquid staking is available via dApps (decentralized applications) connected through WalletConnect. A full list of dApps that can connect to the Tangem Wallet is available on the WalletConnect website here.
  Find detailed instructions on staking via dApps in our blog: How to stake crypto in dApps with Tangem Wallet.

• On which networks is staking available?

  Currently, native staking in the Tangem app is available for ATOM, BNB, POL (Ethereum), SOL and TRX. Soon, we will add native staking support for Polkadot, Cardano, Avalanche, Near, Tezos, Cronos, and Kava. Future updates will also include additional networks.
  
  

  Liquid staking is available through dApps (decentralized applications) and is accessible via WalletConnect. The WalletConnect option in Tangem Wallet supports nearly all popular EVM networks, including Arbitrum, Areon, Aurora, Avalanche C-Chain, BNB Smart Chain, Base, Blast, Canxium, Chiliz EVM, Cronos, Cyber, Ethereum, Ethereum Classic, Ethereum PoW, Fantom Opera, Flare, Gnosis, Kava EVM, Manta Pacific, Mantle, Moonbeam, Moonriver, Optimistic Ethereum, Polygon, Polygon zkEVM, PulseChain, RSK, Shibarium, Telos, and zkSync Era.

• How do I stake cryptocurrency directly in the Tangem app?

  Staking cryptocurrency in the Tangem app is done through the StakeKit provider.
  
  To stake your coins, follow these steps:
  
  1. Open the Tangem app and log in to your wallet.
  2. On the main screen, select the cryptocurrency you want to stake.
  3. In the window that appears, tap "Stake".
  4. Read the staking terms, including unbonding period and APR, and tap "Stake" again.
  5. Enter the number of tokens or their dollar equivalent and tap "Next". You can also stake the entire token balance.
  6. In the "Validator" field, you can choose another validator from those offered by Tangem.
  7. Review all the details before tapping "Stake".
  8. Scan your card to sign the transaction.
  
  Important! The POL staking process consists of two steps: authorizing the smart contract (which incurs a small network fee) and delegating tokens or staking (which incurs a higher network fee).
  
  You can find a step-by-step guide in our blog article: How to stake cryptocurrency in Tangem Wallet.
  

• How do I unstake cryptocurrency?

  To unstake your cryptocurrency, follow these steps:
  
  1. Open the Tangem app and log into your wallet.
  2. On the home screen, select the cryptocurrency you have staked.
  3. In the pop-up window, tap the "Native staking" section.
  4. Choose the appropriate validator from the "Your stakes" section. If the validator in this section is unavailable for selection, it means the warm-up period is not yet over (this applies only to Solana).
  5. Review all the details before tapping "Unstake".
  6. Enter your access code/biometric ID and scan your wallet to sign the transaction.
  
  Before withdrawing your staked coins, you must wait for the unbonding period to end. Once it’s complete, follow these steps:
  
  1. Tap "Unstake" in the "Your stakes" section.
  2. Review all the details before tapping "Withdraw".
  3. Scan your card to sign the transaction.
  
  You can find a step-by-step guide in our blog article: How to stake cryptocurrency in Tangem Wallet.
  

• How do I check my staking results and accrued rewards in the Tangem app?

  To check your staking results and rewards, follow these steps:
  
  1. Open the Tangem app and log in to your wallet.
  2. Select the cryptocurrency you have staked on the home screen.
  3. Tap "Native staking" on the token page.
  4. Open the "Rewards" section. It displays the amount of rewards for each validator, and you will be able to withdraw them if necessary.
  
  Note: The "Rewards" block is always inactive when staking Solana or BNB. Your rewards are compounded to the staked amount, which you can see in the "Your stakes" section.
  

• How do I claim staking rewards in the Tangem app?

  To withdraw your staking rewards, follow these steps:
  
  1. Open the Tangem app and log in to your wallet.
  2. On the home screen, select the cryptocurrency you staked.
  3. Tap "Native staking" on the token page.
  4. Open the "Rewards" section.
  5. Select a validator from the list and tap "Claim rewards".
  6. Review the details before tapping "Claim rewards" again.
  7. Scan your wallet to sign the transaction.
  
  Note: When staking Solana, reward claiming is available only after unstaking.
  When staking POL, reward claiming is only available if the reward earned is greater than 1 POL.

• Why is my Tron staking locked? What does "Locked" in Your stakes mean?

  When staking in Tron, two transactions are sent: one for voting for a validator and another for locking (staking) tokens. If one of the transactions fails for any reason (due to connection issues or network problems), the amount will be locked and displayed in the "Your stakes" section as "Locked."

  
  If you tap on "Locked" you'll have two options:
  1. Unlock: Withdraw the funds from staking so they become available for use.
  2. Vote: Continue the staking process.

  
  To unlock your funds, follow these steps:

  1. Open the Tangem app and log in to your wallet.
  2. Select Tron on the app’s home page.
  3. Tap "Native staking" on the Tron token page.
  4. Tap "Locked" in the "Your stakes" section.
  5. Select "Unlock".
  6. Review the details before tapping "Unlock".
  7. Enter your access code and scan your Tangem device to sign the transaction.

  
  The amount will be unlocked and appear in your balance after the 14-day unbonding period.

  
  To vote, follow these steps:
  1. Open the Tangem app and log in to your wallet.
  2. Select Tron on the home screen.
  3. Tap "Native staking" on the Tron token page.
  4. Tap "Locked" in the "Your stakes" section.
  5. Select "Vote".
  6. At this point, you can choose another validator from the list suggested by Tangem Express.
  7. Review the details before tapping "Vote".
  8. Enter your access code and scan your Tangem device to sign the transaction.

  
  

• Why do I have to give permission when staking POL?

  The POL staking process involves two steps:
  
  1. Giving permission to the StakeKit smart contract: This incurs a small network fee.
  2. Delegating (staking) your tokens: This incurs a higher network fee.
  
  The permission function is essential because it grants a smart contract address access to a specified amount of your tokens. This way, no smart contract can access your tokens unless you permit them.
  
  By granting this permission, you allow the StakeKit smart contract to use your tokens for staking, and the permission fee goes to validators for recording this transaction on the blockchain.

  
  How it works in Tangem:
  1. Open the Tangem app and log into your wallet.
  2. On the homepage, select POL (ex-MATIC) on the Ethereum network.
  3. Tap "Stake" on the token page.
  4. Review the staking terms, then tap "Stake" again.
  5. Enter the token amount (or its dollar equivalent) and tap "Next". You can also stake your entire balance, but ensure you have enough ETH to pay network fees.
  6. In the "Validator" field, you can choose any validator provided by Tangem Express.
  7. Review all details, then tap "Give Permission". A pop-up tab will show the permission fee, allowing you to grant permission for the current transaction or Unlimited. Then tap "Approve" and scan your Tangem.
  At this stage, permission is granted, but your tokens are not yet staked.
  9. To stake the tokens, tap "Stake" again, then enter your access code and scan your wallet to sign the transaction.

  
  Once the transaction is signed and sent to the blockchain, you can view it in a blockchain explorer.

  
  Benefits of giving "Unlimited" permission
  If you grant unlimited permission, you won’t need to give this permission again for future staking transactions unless you revoke it.
  
  

  Important!
  • Permission is required for each smart contract separately.
  • Permission is only requested when staking a token managed by smart contracts (e.g., an ERC20 token). Native coins do not require permission since they operate on blockchain algorithms, not smart contracts.

• What is WalletConnect? How do I use it? How do I interact with DeFi?

  WalletConnect is an open source protocol that allows you to connect mobile wallets to decentralized applications (DApps) securely. You can use WalletConnect to link Tangem Wallet to a wide range of DApps from desktop and mobile devices.
  
  

  All DApps for connecting in the Tangem app are available on the WalletConnect website via the link.
  
  

  The WalletConnect feature in Tangem Wallet is currently available for Solana and EVM networks, in particular for Arbitrum, Areon, Aurora, Avalanche C-Chain, BNB Smart Chain, Base, Blast, Canxium, Chiliz EVM, Cronos, Cyber, Ethereum, Ethereum Classic, Ethereum PoW, Fantom Opera, Flare, Kava EVM, Gnosis, Manta Pacific, Mantle, Moonbeam, Moonriver, Optimistic Ethereum, Polygon, Polygon zkEVM, PulseChain, RSK, Shibarium, Telos, and zkSync Era.
  
  

  You can read more about how to use WalletConnect on Tangem Wallet on our blog.

• How do I connect to a DApp?

  To establish a connection with the DApp (decentralized application), please follow these steps:
  
  1. Open the website or app of the DeFi service.
  2. Choose the "Connect your wallet" feature.
  3. In the subsequent menu, opt for "WalletConnect".
  
  4. If you're accessing the DApp via a mobile device, search for "Tangem" among the available wallet options. Follow the on-screen prompts provided by the Tangem app. You can follow the link to see how it looks in PancakeSwap.
  
  5. When connecting on a PC, a QR code will be displayed on the screen. To scan a QR code, follow these steps:
  • Open the Tangem app.
  • Tap on the three dots located in the top right corner.
  • Select "WalletConnect."
  • Tap on the "+" symbol in the top right corner.
  
  

  You can find step-by-step instructions on our blog.

• How do I revoke smart contract permissions?

  When granting permission to use smart contracts, you can grant it for the current transaction or unlimited. Giving an unlimited permit significantly saves you money compared to spending on commissions when confirming before each swap.
  
  

  You can revoke permission through special services, for example:
  • Ethereum: ETH Etherscan Token Approval Checker
  • Binance Smart Chain: BSC Token Approval Checker
  • Polygon: Polygon Token Approval Checker
  • Arbitrum: Arbitrum Token Approval Checker
  • Fantom: Fantom Token Approval Checker
  • Optimistic Ethereum: Optimistic Ethereum Token Approval Checker
  • Avalanche C-Chain, XDC Network, Shibarium, Base: Revoke.cash
  
  

  To revoke permissions, follow these steps:
  1. Follow the link to the browser of the corresponding blockchain.
  2. Click "Connect to Web3"/"Connect Wallet" and select WalletConnect.
  3. Connect your wallet.
  4. In the list of permissions, there will be a “Revoke” button opposite each of them. Click it to revoke permission.
  
  

  We plan to add the ability to revoke permission directly in the Tangem app in future updates.

• How do I reset the cards to factory settings?

  Before resetting the card to the factory settings, please ensure you move any cryptocurrency stored in your Tangem wallet to a different location for a while (for instance, another wallet or exchange). This is important as resetting the card will result in the complete loss of all funds currently stored on it!
  
  

  It's also crucial to remember the access code for each card. If you forget, you'll need to first reset the access codes on all cards using the backup card. Failing to do so will make a wallet reset on the backup card(s) impossible.
  
  

  To reset the card to factory settings:

  1. Open the Tangem app and enter your wallet.

  2. Tap the three dots in the upper right corner.

  3. Choose the "Card settings" option.

  4. Tap the "Scan card" button and bring the card to your mobile device.

  5. Enter your access code.

  6. Tap "Continue" and bring the card to your mobile device.

  7. Choose the "Reset to factory settings" option.

  8. Please carefully read the warning that informs you that there will be no access to the current wallet on the chosen card after completing this action. If you agree, tap the "Reset the card" button.

  9. Confirm the action by tapping "Reset" again.

  10. Enter the access code and scan the card.
  
  

  After taking these steps, the card will be reset to factory settings.

  
  You can read the detailed instructions on our blog.

• What happens to the balance on the card if you reset the cards to factory settings?

  Resetting a card to factory settings leads to a total zeroing of the card and deletion of the keys. After this action, there will be no access to the current wallet on the chosen card. You must withdraw your cryptocurrency from your wallet before performing a reset to ensure that you don’t lose it.

• How do I create a custom token? How do I add a token that isn’t in the "Manage tokens" list?

  The Tangem app allows you to add custom tokens on most networks supported by the app. 
  
  This feature is available for the following networks: Arbitrum, Areon, Aurora, Avalanche C-Chain, BNB Beacon Chain, BNB Smart Chain, Base, Blast, Canxium, Casper, Cardano, Clore, Cronos, Cyber, Decimal Smart Chain, DisChain (Ethereum Fair), Ethereum, Ethereum Classic, Ethereum PoW, Fantom Opera, Flare, Gnosis Chain, Hedera, Kava EVM, Manta Pacific, Mantle, Moonbeam, Moonriver, OctaSpace, Optimistic Ethereum, PLAYA3ULL GAMES, Polygon, Polygon zkEVM, PulseChain, RSK, Shibarium, Solana, Telos, Tron, VeChain, XDC Network, zkSync Era.
  
  How to add a custom token to the Tangem wallet
  To create a custom token, do this:
  1. Open the Tangem app.
  2. Tap the three dots in the top right corner.
  3. Select the preferred wallet.
  4. Go to the Manage tokens section.
  5. Tap the “+” icon in the upper right corner of the list of tokens.
  
  

  To add a token, you need the following inputs:

  1. The token's smart contract address. The address can usually be found on coinmarketcap.com or in the explorer (browser) of the corresponding blockchain.

  2. The network where you want to add the token.
  

  3. The token name (for example, Bitcoin) and token symbol (for example, BTC).

  4. Decimals determine the value into which one token can be split for transactions. This value can be found in the token overview in the explorer of the corresponding blockchain.

  5. BIP44 coin type. For this operation, "Default" is usually selected.

   

  For example, to add the BinaryX (BNX) token on the BNB Smart Chain network, you need to fill in the fields as follows:

  1. Contract address: 0x8C851d1a123Ff703BD1f9dabe631b69902Df5f97 You can see this contract address in the “Contracts” section via the link.

  2. Network: BNB Smart Chain. 3. Token name: BinaryX.

  4. Token symbol: BNX.

  5. Decimals: 18. You can see the number of decimal places in the token card in the explorer.

  6. BIP44 derivation: Default.
  
  

  Detailed instructions are also available on our blog.

• Why is the price of custom tokens not displayed?

  If you've added a custom token via a smart contract address, we may not have the price for that token. These custom tokens won't be included in the total balance calculation, and instead of the price, a dash will be displayed next to the token name.

• What rate is used to convert cryptocurrency into fiat?

  The exchange rates in the Tangem app come from the major cryptocurrency aggregator coingecko.com and are updated every 15 minutes.

  Please note that this is just a reference figure so that you can estimate the value of your portfolio.

  We recommend following rates through an exchange app or a website for active trading.

• Are Tangem servers used for blockchain operations?

  Tangem doesn’t have its own servers that connect to blockchains. It is the app on your phone which communicates directly with the blockchain. Tangem's philosophy is to provide users with a technological solution for interacting with crypto assets and nothing more. The wallet protocol looks like this: card <-> application <-> blockchain.

• Can I use the Tangem app without the internet on my phone?

  Cryptocurrency is stored on blockchains, and the card holds the keys to the blockchain addresses. Without the internet, there is no access to the blockchain, and it is impossible to know your current balance so you can't spend money. You can, however, top up your balance.

• Is mining available on Tangem Wallet?

  There are no restrictions for mining in UTXO-based blockchains (Bitcoin, Bitcoin Cash, Litecoin, Dogecoin, Dash, Kaspa, Ravencoin) on Android, and the wallet can sign thousands of inputs. On iOS, there is a temporary limit of up to 700 inputs per minute. In account-based blockchains, there is no concept of inputs, so there are no restrictions on mining with Tangem Wallet. Examples of account-based blockchains include Ethereum Classic, Ethereum Fair, Ethereum PoW.

• How does biometric authentication work? How do I activate it?

  You can use biometric authentication (fingerprint or facial recognition) instead of entering an access code and scanning your card to log in to the Tangem app, view your coin and token balances, switch between wallets if you have more than one.
  
  To activate this biometric authentication, follow these steps:

  1. Open the Tangem app.
  2. Tap on the three dots in the top right corner of the screen.
  3. Go to "App Settings".
  4. Enable "Wallet saving" and "Access code saving".
  
  When you enable "Wallet saving", all Tangem wallets (if there is more than one) will be linked to the app. You can now gain access to the app with biometric authentication.
  
  

  When you enable "Save access code", the access codes will be stored on your phone in encrypted form. When dealing with the cards, you'll have to use biometric authentication instead of an access code.
  Important! To sign a transaction, you must still need your Tangem card.

• Is it safe to use biometrics?

  When using biometric authentication, the access code from the card is stored in encrypted form in the device's secure storage: the keychain. In this case, the keys do not migrate anywhere from the card. The access code, meanwhile, has no functional value without the card. It is important to note that this function is optional and can be disabled at any time or not enabled at all. You can read more about how biometric authentication works in our blog article.

• How do I get an xPub key? How do I export my transaction history?

  When preparing tax returns, you often need to use third-party services that can help you automate the process and provide detailed reports after connecting your cryptocurrency wallet. One of the most convenient ways to do this is to use an extended public key (xPub).

  
  What is an xPub key?
  The extended public key (xPub) is the master key of the account from which all public addresses are generated. It allows third-party services to obtain transaction information without needing access to your private key, keeping your wallet secure.

  
  How do I get an xPub key in the Tangem app?
  To get an xPub key, follow these steps:
  1. Open the Tangem app and log in to your wallet.
  2. Go to the token page by clicking on it on the main screen. 
  3. Click on the three dots in the upper right corner. 
  4. Select Generate XPUB. 

  
  For Android users: xPub key generation is currently only available for BTC. 
  For iOS users: xPub key generation is available for most blockchains, especially those that use the UTXO model, such as Bitcoin, Bitcoin Cash, Dash, Dogecoin, Kaspa, Litecoin and Ravencoin.

  
  Export transaction history
  There is currently no option to export transaction history in the Tangem app. However, some blockchains allow you to export your transaction history in a CSV file on their website. To go to the blockchain explorer, follow these steps:
  1. Open the Tangem app and log in to your wallet.
  2. Tap on the desired cryptocurrency on the main screen of the Tangem application 
  3. Find the View Transaction History (or Explorer) option and click on it.
  4. This will take you to your wallet's public address in the browser. In the blockchain browser, you can find and export your transaction history for further use in tax reporting.